Question: We have damaged a power cable on a system and are requesting for an additional one. Answer: The unit does come with a built in DC 24VDC Terminate Block + and -, thus no external power adapter will be included. And the Power cable wasn’t ...
Before your work, please make sure that the power is disconnected. Step 1: Release total of 11 screws (3 on top, bottom & left-side and 2 on right-side). Step 2: Remove the LCD front frame. Step 3: Remove the tape at the back of LCD panel & unplug ...
Before your work, please make sure that the power is disconnected. Step 1: Remove all the LCD panel screws. (13 screws) Step 2: Remove the LCD mounting screw carefully in case of damage LCD panel. (4 screws) Step 3: Unplug the LVDS cables carefully ...
“Before your work, please make sure that the power is disconnected.” Step 1: Remove the top rear kit cover. 7 screws on the top, 4 screws on each side. Step 2: After cover removed, cut off the cable tie and disconnect the power adapter. Then replace ...
1. Remove screws of clamp mount brackets. 2. Remove screws of LCD panel on back housing at left and right sides. 3. Lift up front bezel with LCD touch screen for replace power or AD board 4. Take photos for wires on boards before replacement. 5. ...