Part No.: NVP117C8e+ Video Input - Case-6-OW-109039-78264 - Question: How to hard reset to factory default?
Assuming the unit is on AV (BNC) mode. Please try to do the following:
- Press the “U turn” button to call up the on-screen video mode on top right corner.
- Use up/down arrow to select the VGA mode.
- Press the “enter” button to confirm the selection.
Related Articles
Part No. NW119C16e - Case 77983 - How to Reset Cat5/6 KVM to Factory Default
How to Reset Cat5/6 KVM to factory default The KVM can be reset on the KVM PCB board. Open the KVM top metal cover. Find the jumper J2(on red board) or J3(on green board), then use either paper clip or scissors to touch the two boxes of J2 then plug ...No Video input EDID EPM/ECH/EOP
No Signal Issue: The Ad board is auto detection in design, if no video signal detected OSD MENU item cannot be shown on screen, however you can press AUTO button to search next input. We have another composite AD board can show pup-up menu for ...Part No.: KPC1210i5-J-FTR-V1 - Case 6-111082 - Question: Can video camera view on the Touch PC?
Question: We have a video camera with a HDMI output. I was asking if we could view that video on the touchscreen if we connect the HDMI connector to the touchscreen/PC? Answer: I don’t think so, since most Panel PC video is output not input. meaning ...Part No.: BMIL21730-16HDMIe - Case 6-120018 - Question: Hot Key Sequence for selecting input?
Question: Is there is a hot key sequence that will allow you to pick a particular input? Answer: CAPS + CAPS+ 0 + 1 (for ports 01-09) and CAPS + CAPS + 1 + 0 (for ports 10-16)Part no.: BCPCW4200HDC2D - Case 6-110876 - Question: When turn on, can't see Hard Drive.
Question: Let me introduce myself I work in Fameccanica and I’m a software coordinator. On one of our machines, we have a problem with your graphic display. When you turn on the system, it seems that it can’t see its hard drive. So, what can we do? ...