Part No.: NVP119-S801b - Case 75909 - Question: Is adding an auxiliary USB port or (ideally) two to the NVP119-S801b possible?

Question:
Is it possible to add an auxiliary USB port or (ideally) two to the NVP119-S801b, 12-669-B.  We want to be able to plug in a USB device and have it connected through the KVM.

Answer:

1. If you want the USB device to be used on all 8 PCs – NVP119-801Hb with NB-6 cables.

2. If the USB device to be used on a single PC – NVP119-S801b-USB (it’ll have a single USB port at the rear kit for peel to peel connection).

Question:

On the USB port, does the NVP119-801Hb populate the front USB port shown below?
For the NVP119-S801b-USB, how would this connection work if it only supports one PC?  Would there be a separate USB port going out to that PC?

Answer:

For NVP119-8010Hb – there is a front USB port on keyboard drawer as you mentioned, and it’ll be able to access all 8 devices thru NB-6 cable.

For NVP119-S801b-USB – there is also a front USB port on keyboard drawer (same location), but there is an individual USB port at the rear kit to directly connect to a single device for access/control.

• Related Articles

• Part No.: NVP117-S801e-H - Question: Does the HDMI port also support the USB aspect of the KVM or Video only?

  Question: NVP117-S801e-H, for clarification purposes, does the HDMI port below also support the USB aspect of the KVM or is it video only? Meaning, would the HDMI port have keyboard functionality as well?  We are quoting our customer and want to make ...

• Part No.: DRP4W2150A-HB-HDMI - Case: 75864 - Question: Deployment Configuration?

  Model: DRP4W2150A-HB-HDMI  Rugged 4U 26" Deep 21.5" Quad Display Drawer Platform: Hydra Series Frame: 26" Deep LCD(s): (215HBx4) 4x21.5" FHD (1920x1080) LED Backlit High Bright Panels to 1500Nits Controller(s): aRGB/VGA, HDMI, Display Port Front: 4U ...

• Part no: IVP1700Ce-USB - Case 6-110883. Question: Hardware having issues?

  Customer Issue: The initial test MKA assets model IVP1700CE-USB (April 2021) works fine with our KVM Vertiv, model SC840. The revised MKA model IVP1700CE-USB(July 2022) is the hardware that is having issues. Listed below are problems we are ...

• Part No. ECHW1730HD - Case 6-104475-b - Question: How to install 17.3" 5-Wire Resistive Touch?

  1. Clean LCD panel surface 2. Add double side adhesive sponge sticks on four sides of LCD panel 3. Remove plastic films on both sides of 17.3” 5-wire resistive touch 4. Mount the touch on the LCD panel, active side is outer side. It’s helpful for ...

• Part No.: ASKW2400S - Case 6-110804 - Question: Keyboard not working.

  Customer Issue: We tried to disconnect and connect the cable, but keyboard didn’t work. Actually, the cable of keyboard and touchpad is the same. We already tried: -connect and disconnect as questioned; -restart the computer same times; -connect to ...