Part. No.: BHK117-8Ue - S/N: ASI18E0103 - Question: What is default RGB KVM User and Password?
When powering up the unit. It is not required to provide authentication to access the KVM control for all system connected to the unit.
*The PS/2 model will require the default password upon power on. The default password is 00000000.
After login the screen will display status of the current setting. This will give you information regarding the port (name) and key setting. Pressing any key will remove the status display.
*Menu might appear differently with the PS/2 Only Model.
*The PS/2 model will require the default password upon power on. The default password is 00000000.
After login the screen will display status of the current setting. This will give you information regarding the port (name) and key setting. Pressing any key will remove the status display.
*Menu might appear differently with the PS/2 Only Model.
Related Articles
Resetting new IP KVM password to Default Value
Click the link below Resetting new IP KVM password to Default ValuePart No. NW119C16e - Case 77983 - How to Reset Cat5/6 KVM to Factory Default
How to Reset Cat5/6 KVM to factory default The KVM can be reset on the KVM PCB board. Open the KVM top metal cover. Find the jumper J2(on red board) or J3(on green board), then use either paper clip or scissors to touch the two boxes of J2 then plug ...Modular Combo-Free KVM Switch User Manual
Click the link below Modular Combo-Free KVM switch User ManualAVP Rackmount Keyboard KVM LCD Drawer User Manual
Click the link below AVP Rackmount Keyboard KVM LCD Drawer User ManualSingle Rail Console with Modular KVM Switch User Manual
Click the link below Single Rail Console with Modular KVM Switch User Manual