Part No.: ECH1210B-SIP-TR - S/N: 811611007316-106286 - Question: Why its look like humidity as entered behind the front Glass?

Answer: Most likely because of the temperature changes.  Just keep the screen Turned ON for a long period of time the humidity inside the glass will disappear.

See below pictures for reference:

• Related Articles

• Part No.: ECH1210B-SIP-TR - Case 6-106286 - Question: Touchscreen not responding properly?

  Question: Touchscreen not responding properly, some moisture observed behind the glass Answer: Please See for how to trouble shooting Touchscreen https://desk.zoho.com/portal/itechcompany/en/kb/articles/how-to-troubleshoot-5-wire-resistive-touch ...

• Part no.: SCHW5500-SIP - S/N: C0041502001-104296a - Question: How to Remove and Replace Power Supply?

  Replacement Procedure 1. Loosened the screws and removed the maintenance cover. (Blue Portion). 2. After the maintenance cover opened. Loosened the power board’s screws. 3. Replace the faulty Power Supply and Replace with a new one.

• Part no: NPW617HD-TRB-24 - Case 6-120349 - Question: Screen does not look whole because it is displaced from its original position.

  Issue: Screen does not look whole because it is displaced from its original position Solution: Open the LCD front frame then place it from its original position. Before your work, please make sure that the power is disconnected. Remove all the LCD ...

• Part no.: CCHW4300HB-SIP-H - Case 6-120127 - Customer: Request for metal plate in front of the buttons on the back of the screen

  Customer: We would like to have a metal plate in front of the buttons on the back of the screen. Solution: We manufactured 2 metal plates to meet customer's request. Installation: You should remove the protection film before cover installation Step ...

• Part No. YPM1500PHB2WT-TR - Case 6-OW-110776-77852 - Question: How to safely remove the damaged film to replace with new one.

  Issue: Damaged Touch Film Because the touch film has been damaged and turned into atomization. Only removing it will make the display work properly. If there are no other problems with the monitor itself. After removing the Touch, the display screen ...