Part no.: NVP2DW17HBe-R - Case 111016 - Question: How does these KVM Video Keyboard cables work with NVP2DW17HBe-R?

Cable#1: For Center display (DVI-D signal input + USB for keyboard + USB for mouse)

Cable#2: For Right display (DVI-D signal input), pls disregard the VGA & USB connector in this cable which are of no use so we tightened them.

*You  will need to manually select the DVI-D signal input for the Right display.

• Related Articles

• DKP Keyboard KVM USB Cables Connectors Instructions

  Turn off your computer. You should always turn off your computer before connecting or disconnecting a device. Connect the video (VGA) connector of the KVM cable to the video card connector on the rear panel of your computer. Identify and connect the ...

• Part No.: NVIP117162e - Case 109950 _ Question: How to reset Combo KVM Board (standalone KVM)

  Question: Hello iTech team. I am having some issues with the new KVM recently ordered and installed in Dallas. I was able to setup the NVIP117162e (SN/S2027790520125-1120G001-109950) and get it added to the network but when I add the extender NVS1601 ...

• Part No.: NVP117-S801e-H - Question: Does the HDMI port also support the USB aspect of the KVM or Video only?

  Question: NVP117-S801e-H, for clarification purposes, does the HDMI port below also support the USB aspect of the KVM or is it video only? Meaning, would the HDMI port have keyboard functionality as well?  We are quoting our customer and want to make ...

• Part No.: NVIP117162e - Case 6-OW-109950 - Question: KVM IP Module Compatibility?

  Question: I am having problems using the Remote Console option on all of our I-Tech KVMS. It does not matter anymore which browser I use but I always get the Browser has no Java message even though I have downloaded Java.  Also,  I just want to make ...

• Part No.: ASKW2400S - Case 6-110804 - Question: Keyboard not working.

  Customer Issue: We tried to disconnect and connect the cable, but keyboard didn’t work. Actually, the cable of keyboard and touchpad is the same. We already tried: -connect and disconnect as questioned; -restart the computer same times; -connect to ...