AD Board Replacement - Model: EPC2010AHB-H-MD1

Case no.: 6-110206a

Part no.: EPC2010AHB-H-MD1

S/N: 8321020000583-110206a

Symptom: User’s PC detects wrong resolution.

Possible Cause: HDMI of AD board was damaged, that usually happened in long signal cable with HDMI extender/repeater, or high voltage introduced via the cable.

Following show connection of cables on AD board. Be careful on the LVDS cable, there are two cut or empty pins, connection cannot be shifting or reversed in direction.

• Related Articles

• How to Check AD Board Model: AVP117e-220DC

  Click the link below How to Check AD Board for Model: AVP117e-220DC

• Replacement AD Board Instruction for CCH/SCH for SIP Series

  Click the link below Replacement AD Board Instruction for CCH/SCH for SIP Series

• Replacement AD Board Instruction for CCH / SCH for SIP Series

  Click the link below Replacement AD Board Instruction for CCH / SCH for SIP Series

• How to Remove and Replace AD Board - Model: SCHW4200HB-SIP-V1

  Part no: SCHW4200HB-SIP-V1 SO: 1103041a Replacement Procedure 1. Loosed the stainless screws of the maintenance cover and removed the maintenance cover ( with waterproof gasket )... blue portion. 2. Loosed the waterproof cover ( DVI ) and loosed the ...

• Part No. CCHW6500-SIP-H - Case 6-120194-77571 - Question: How to replace AD Board?

  Step 1. Loosed the screws and removed the maintenance cover. (blue marked) Step 2. Removed some cables and loosed AD board screws. Red marked : LVDS cable Yellow marked : Backlight cable Green marked : 12VDC power input cable White marked : HDMI ...