How to remove and replace DVI KVM Board for Rear-Kit

• Related Articles

• How to change KVM Rear Kit on 1U NVP Series

  Click the link below How to change KVM Rear Kit on 1U NVP Series

• Part No. NVP117e - Case 6-120748-78317 - How to remove and change the rear kit on NVP117e (Upgrade from AC to 12V DC Power)

  Before your work, please make sure that the power is disconnected. Step 1: Remove the top rear cover behind the LCD panel. Step 2: Remove the small top cover behind the LCD panel. Step 3: Unplug four connectors from the original unit as shown below, ...

• How to change AD board from VGA + DVI to HDMI and DP - Model: AMil-1900HB-TR-AC

  Part No.: AMil-1900HB-TR-AC Sales Order: 110385 Dated: 03/21/2022 1. Remove screws x 10 to remove VGA base cover 2. Remove screws x 3 from the bottom to remove IO bracket set 3. Move NO.1 PCB to the new IO Bracket, NO.2 (DVI) no needed anymore 4. New ...

• Remove and Replace AD Board & Inverter Instruction for NPW9240K-TCB

  Click the link below Remove and Replace AD Board & Inverter Instruction for NPW9240K-TCB

• Part No.: AVPW1560Ce - Case 6-OW-110901-78507 - Question: How to Replace AD Board and IO Board?

  Step 1. Remove screw x 14 to remove rear cover Step 2. Re-plug LCD cable on the AD board to check if the issue can be eliminated. If not, please replace the AD board and make sure the wiring is exactly the same as the original. Step 3. If the new AD ...