Turn off your computer. You should always turn off your computer before connecting or disconnecting a device. Connect the video (VGA) connector of the KVM cable to the video card connector on the rear panel of your computer. Identify and connect the ...
Operating System Driver Touch Driver for Windows 7 32-Bit and 64-bit, RS-232 and USB Touch Driver for Windows 2000, Windows XP, Windows 98 (SE) and Windows ME Operating Systems Touch Driver for WinNT40_Rev500 Operating System Touch Driver for Windows ...
Remove mounting brackets to separate front bezel. Remove screws of touch panel on both sides of back housing, and then lift touch panel for Ad board replacement. Made mark or take photo before replacement for further recovery. Replace Ad board, the ...
(1) Before your work, please make sure that the power is disconnected. Step 1: Remove all the LCD panel screws. (11 screws) Step 2: Remove the LCD mounting screw carefully in case of damage LCD panel. (8 screws) Step 3: Unplug the cable connected to ...