Part No.: RCK-411 - Case 6-121222-80214 - Question: How to replace keyboard

1. From the back of the unit, remove the keyboard holder by unscrewing the six screws.
2. Remove the old keyboard and install the replacement. Ensure the keyboard bumper is properly aligned with the notch in the holder.
3. Reattach the keyboard tray to the unit by securing the screws.
4. Route the keyboard cable along the cable arm and use a tie wrap to secure the cable to the arm.
   

• Related Articles

• Part No. AK201e-FR - Case 6-120995-79100 - Question: How to replace Keyboard Controller

  1. Remove screw x 4 from the bottom. 2. Remove screw x4. 3. Remove up cover 4. Replace keyboard controller

• Part No.: ASKW2400S - Case 6-110804 - Question: Keyboard not working.

  Customer Issue: We tried to disconnect and connect the cable, but keyboard didn’t work. Actually, the cable of keyboard and touchpad is the same. We already tried: -connect and disconnect as questioned; -restart the computer same times; -connect to ...

• Part No.: DRP4W2150A-HB-HDMI - Case: 75864 - Question: Deployment Configuration?

  Model: DRP4W2150A-HB-HDMI  Rugged 4U 26" Deep 21.5" Quad Display Drawer Platform: Hydra Series Frame: 26" Deep LCD(s): (215HBx4) 4x21.5" FHD (1920x1080) LED Backlit High Bright Panels to 1500Nits Controller(s): aRGB/VGA, HDMI, Display Port Front: 4U ...

• Part No. APV1730HB - Case 6-OW-110736-79009 - Question: How to replace LCD Panel

  1. Remove screw x 4 to remove rubber bumper. 2. Remove screw x 18 3. Remove screw x 3 each side to replace the panel

• Part no.: NVP2DW17HBe-R - Case 111016 - Question: How does these KVM Video Keyboard cables work with NVP2DW17HBe-R?

  Cable#1: For Center display (DVI-D signal input + USB for keyboard + USB for mouse) Cable#2: For Right display (DVI-D signal input), pls disregard the VGA & USB connector in this cable which are of no use so we tightened them. *You  will need to ...